Home › BODY ELECTRICAL › LIGHTING › LUGGAGE ROOM LIGHT

LUGGAGE ROOM LIGHT > INSTALLATION

for Preparation Click here



1. INSTALL BACK DOOR COURTESY LIGHT ASSEMBLY


    B135646
  1. Install the bulb to the light.



    B135645
  1. Attach the 4 claws to install the light shade.



    B135644
  1. Install the light as shown in the illustration.



2. INSTALL BACK DOOR TRIM BOARD
  1. Install the back door trim pocket with the 5 screws.



    B129943
  1. Attach the 13 clips to install the trim board.



3. INSTALL BACK DOOR SIDE GARNISH RH

HINT:
Use the same procedure described for the LH side.



4. INSTALL BACK DOOR SIDE GARNISH LH


    B129945
  1. Attach the 2 claws and 2 clips to install the garnish.



5. INSTALL BACK DOOR CENTER GARNISH


    B129944
  1. Attach the 4 claws and 4 clips to install the garnish.



6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL