LUGGAGE ROOM LIGHT > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE BACK DOOR CENTER GARNISH |
![]() |
Using a screwdriver, detach the 4 claws and 4 clips and remove the garnish.
| 3. REMOVE BACK DOOR SIDE GARNISH LH |
![]() |
Using a screwdriver, detach the 2 claws and 2 clips and remove the garnish.
| 4. REMOVE BACK DOOR SIDE GARNISH RH |
| 5. REMOVE BACK DOOR TRIM BOARD |
![]() |
Using a screwdriver, detach the 13 clips and remove the trim board.
Remove the 5 screws and the back door trim pocket.
| 6. REMOVE BACK DOOR COURTESY LIGHT ASSEMBLY |
![]() |
Using a screwdriver, pry out the light as shown in the illustration.
![]() |
Detach the 4 claws and remove the light shade.
![]() |
Remove the light bulb from the light.