Home › TRANSMISSION ยท U241E AUTOMATIC TRANSAXLE › TRANSMISSION OIL COOLER

TRANSMISSION OIL COOLER > INSTALLATION

for Preparation Click here



1. CONNECT NO. 1 OIL COOLER OUTLET HOSE


C133018E01
  1. Connect the hose to the transaxle and transmission oil filler tube.



2. INSTALL OIL COOLER TUBE SUB-ASSEMBLY


C133020
  1. Install the tube with the bolt.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }

    NOTICE:
    Make sure the rotation stopper of the tube contacts the top part of the engine mount bracket FR.



3. CONNECT NO. 1 OIL COOLER INLET HOSE


C133019E01
  1. Connect the hose to the transaxle and oil cooler tube.



4. CONNECT NO. 1 AND NO. 2 TRANSMISSION OIL COOLER HOSES


C133021E01
  1. Connect the 2 hoses to the transmission oil filler tube and oil cooler tube.



  1. Install the 2 automatic transmission oil cooler tube clamps to the radiator.


    C130927E01

  1. Install the 2 No. 1 flexible hose clamps to the radiator with the 2 bolts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

  1. Connect the 2 hoses to the radiator.

  1. Pass the 2 hoses through the 2 automatic transmission oil cooler tube clamps.

  1. Connect the 2 hoses to the 2 No. 1 flexible hose clamps, and close the 2 clamps.



5. ADD AUTOMATIC TRANSAXLE FLUID


6. INSPECT AUTOMATIC TRANSAXLE FLUID
  1. Inspect the automatic transaxle fluid (Click here).