Home › STEERING › STEERING COLUMN › STEERING COLUMN ASSEMBLY (for LHD)

STEERING COLUMN ASSEMBLY (for LHD) > INSPECTION

for Preparation Click here



1. CHECK TORQUE SENSOR
  1. Check the torque sensor .



2. CHECK POWER STEERING MOTOR
  1. Check the power steering motor .



3. CHECK MOTOR ROTATION ANGLE SENSOR
  1. Check the motor rotation angle sensor .



4. INSPECT STEERING COLUMN ASSEMBLY


    C163149E03
  1. Check that the 2 bushings are securely installed to the steering column assembly.
    Text in Illustration 
    *1
    Collar
    *2
    Bushing

    HINT:
    If the bushings are missing or damaged, replace the steering column assembly with a new one.



  1. Inspect the capsules.



      C254029E01
    1. Check that the 2 capsules are securely installed to the steering column assembly as shown in the illustration.

      Standard dimension (A):
      8 mm (0.0315 in.)

      Text in Illustration 
      *1
      Capsule
      If the capsules are not positioned as specified, replace the steering column assembly with a new one.

    2. Check the 2 capsules for deformation and damage.
      If either of the capsules is deformed, loose, missing or damaged, replace the steering column assembly with a new one.