OIL PUMP > INSPECTION |
| 1. INSPECT OIL PUMP RELIEF VALVE |
![]() |
Coat the oil pump relief valve with engine oil and check that it falls smoothly into the valve hole by its own weight.
If it does not, replace the relief valve. If necessary, replace the oil pump assembly.
| 2. INSPECT OIL PUMP ROTOR |
Check the tip clearance.
![]() |
Using a feeler gauge, measure the clearance between the drive and driven rotor tips.
Check the side clearance.
![]() |
Using a feeler gauge and precision straightedge, measure the clearance between the 2 rotors and precision straightedge.
Check the body clearance.
![]() |
Using a feeler gauge, measure the clearance between the driven rotor and oil pump body.