OIL PUMP > REASSEMBLY |
| 1. INSTALL OIL PUMP RELIEF VALVE |
![]() |
Coat the relief valve and relief valve hole with engine oil.
| *1 | Relief Valve |
| *2 | Relief Valve Spring |
| *3 | Relief Valve Plug |
Insert the relief valve and spring into the pump body hole.
Using a 22 mm socket wrench, install the plug.
| 2. INSTALL OIL PUMP ROTOR SET |
![]() |
Coat the oil pump drive and driven rotors with engine oil, and place them into the oil pump with the marks facing the oil pump cover side.
| *1 | Alignment Mark |
| 3. INSTALL OIL PUMP COVER |
![]() |
Install the oil pump cover with the 6 bolts.