Home › ENGINE ยท 2GR-FE › CHARGING › CHARGING SYSTEM

CHARGING SYSTEM > PRECAUTION

for Preparation Click here



1.Check that the battery cables are connected to the correct terminals.

2.Disconnect the battery cables if a quick charge is given to the battery.

3.Do not perform tests with a high voltage insulation resistance tester such as a megohmmeter.

4.Never disconnect the battery while the engine is running.

5.Check that the charging cable is tightly connected onto terminal B of the generator and the fuse box.

6.Do not check whether the generator generates current or not while terminal F is connected to the other terminals.