Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

DTC    P1630/64    Communication Error from Skid Control ECU to ECM

DTC    U0122/82    Communication Stop from VSC to ECM

for Preparation Click here


DESCRIPTION

The skid control ECU sends signals such as cruise control cancel demand signals and brake operation demand from ECM response signals to the ECM when the cruise control system is in operation.

DTC No.
DTC Detection Condition
Trouble Area
P1630/64
While cruise control is either preparing for operation or operating, if communication data from skid control ECU is logically inconsistent for a certain amount of time, ECM records this logical error code
  1. Communication circuit
  2. Skid control ECU
  3. ECM
U0122/82
While cruise control is either preparing for operation or operating, if communication data from skid control ECU is invalid for a certain amount of time, ECM records communication cut off code
  1. Communication circuit
  2. Skid control ECU
  3. ECM

INSPECTION PROCEDURE

HINT:
This circuit uses CAN communication. Therefore, if there are any malfunctions in the communication circuit, one or more DTCs in the CAN communication system are output.



1.CHECK CAN COMMUNICATION SYSTEM
    Refer to HOW TO PROCEED WITH TROUBLESHOOTING (Click here).