Home › BODY ELECTRICAL › LIGHTING › FOG LIGHT RELAY

FOG LIGHT RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT FRONT FOG LIGHT RELAY


    B060778E14
  1. Remove the front fog light relay from the No. 6 relay block.

  1. Measure the resistance of the relay.

    Standard resistance:
    Tester Connection
    Specified Condition
    3 - 5
    10 kΩ or higher
    3 - 5
    Below 1 Ω
    (Battery voltage applied to terminals 1 and 2)

    If the result is not as specified, replace the relay.



2. INSPECT REAR FOG LIGHT RELAY


    B060778E14
  1. Remove the rear fog relay from the No. 6 relay block.

  1. Measure the resistance of the relay.

    Standard resistance:
    Tester Connection
    Specified Condition
    3 - 5
    10 kΩ or higher
    3 - 5
    Below 1 Ω
    (Battery voltage applied to terminals 1 and 2)

    If the result is not as specified, replace the relay.