BRK RELAY (w/ VSC) > ON-VEHICLE INSPECTION |
| 1. INSPECT BRK RELAY |
![]() |
Remove the BRK relay from the engine room No. 1 relay block.
Measure the resistance of the relay.
| Tester Connection | Specified Condition |
| 3 - 4 | Below 1 Ω |
| 3 - 4 | 10 kΩ or higher (Battery voltage applied to terminals 1 and 2) |
| 3 - 5 | 10 kΩ or higher |
| 3 - 5 | Below 1 Ω (Battery voltage applied to terminals 1 and 2) |