Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 2GR-FE COOLING

2GR-FE COOLING > SERVICE DATA



THERMOSTAT 
Condition
Specified Condition
Standard valve opening temperature
80 to 84°C (176 to 183°F)
Standard valve lift
10 mm (0.39 in.) or more at 95°C (203°F)

COOLING FAN MOTOR 
Item
Motor Type
Condition
Specified Condition
No. 1 cooling fan motor
240 W
at 20°C (68°F)
18.0 to 22.0 A
No. 2 cooling fan motor
240 W
at 20°C (68°F)
18.0 to 22.0 A

COOLING FAN ECU 
Item
Tester Connection
Condition
Specified Condition
Cooling fan ECU
A64-3 - Body ground
Ignition switch ON
11 to 14 V
A65-3 - Body ground
Ignition switch ON
11 to 14 V
A64-1 - Body ground
Always
Below 1 Ω
A65-1 - Body ground
Always
Below 1 Ω

COOLING FAN RELAY 
Item
Tester Connection
Specified Condition
No. 1 fan relay
3 - 5
10 kΩ or higher
3 - 5
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
No. 2 fan relay
3 - 5
10 kΩ or higher
3 - 5
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)

RADIATOR 
Item
Tester Connection
Specified Condition
Radiator reservoir cap
For brand-new cap
93.3 to 122.7 kPa (0.95 to 1.25 kgf/cm2, 13.5 to 17.8 psi)
For used cap
78.5 kPa (0.8 kgf/cm2, 11.4 psi)