Home › SERVICE SPECIFICATIONS › SERVICE SPECIFICATIONS › 2GR-FE STARTING

2GR-FE STARTING > SERVICE DATA



Starter assembly
Standard current
90 A or less at 11.5 V
Starter relay
Standard resistance
3 - 5
10 kΩ or higher
3 - 5
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
Ignition switch
Standard resistance
-
10 kΩ or higher at LOCK
2 (AM1) - 3 (ACC)
Below 1 Ω at ACC
2 (AM1) - 3 (ACC)
Below 1 Ω at ON
2 (AM1) - 4 (IG1)
Below 1 Ω at ON
6 (IG2) - 7 (AM2)
Below 1 Ω at ON
1 (ST1) - 2 (AM1)
Below 1 Ω at START
1 (ST1) - 4 (IG1)
Below 1 Ω at START
6 (IG2) - 7 (AM2)
Below 1 Ω at START
6 (IG2) - 8 (ST2)
Below 1 Ω at START
Starter magnetic switch assembly
Standard resistance
50 - C
1 Ω or lower
50 - Body
2 Ω or lower
Starter armature assembly
Standard resistance
Segment
1 Ω or lower
Commutar - Coil core
10 kΩ or higher
Starter armature assembly
Commutator depth
Standard
3.1 mm (0.122 in.)
Maximum
3.8 mm (0.150 in.)
Starter commutator end frame
Brush length
Standard length
9.0 mm (0.354 in.)
Minimum length
4.0 mm (0.158 in.)
Standard resistance
Positive (+) - Negative (-)
10 kΩ or higher
Snap ring
Maximum length
5.0 mm (0.197 in.)