Home › ENGINE ยท 3ZR-FAE › ENGINE CONTROL SYSTEM › CAMSHAFT OIL CONTROL VALVE

CAMSHAFT OIL CONTROL VALVE > INSTALLATION

for Preparation Click here



1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)


    A195062E04
  1. Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.
    Text in Illustration 
    *1
    New O-Ring



    A205035E01
  1. Install the oil control valve with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

    NOTICE:
    1. Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).
    2. Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

  1. Connect the oil control valve connector.



2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)


    A195062E04
  1. Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.
    Text in Illustration 
    *1
    New O-Ring



    A213076E01
  1. Install the oil control valve and wire harness bracket with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

    NOTICE:
    1. Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).
    2. Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

  1. Connect the oil control valve connector.



3. INSTALL NO. 2 CYLINDER HEAD COVER


    A209050
  1. Attach the 4 clips to install the cover.

    NOTICE:
    1. Be sure to attach the clips securely.
    2. Do not apply excessive force or do not hit the cover to attach the clips. This may cause the cover to break.