CAMSHAFT OIL CONTROL VALVE > REMOVAL |
| 1. REMOVE NO. 2 CYLINDER HEAD COVER |
![]() |
Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.
| 2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side) |
![]() |
Disconnect the oil control valve connector.
Remove the bolt and oil control valve.
Remove the O-ring from the oil control valve.
| 3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side) |
![]() |
Disconnect the oil control valve connector.
Remove the bolt, wire harness bracket and oil control valve.
Remove the O-ring from the oil control valve.