Home › ENGINE ยท 3ZR-FAE › EMISSION CONTROL › AIR FUEL RATIO SENSOR

AIR FUEL RATIO SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL AIR FUEL RATIO SENSOR


    A213340E01
  1. Using SST, install the sensor to the exhaust manifold.

    SST
    09224-00010  

    Torque:
    without SST :
    44 N*m{ 449 kgf*cm , 32 ft.*lbf }
    with SST:
    40 N*m{ 408 kgf*cm , 30 ft.*lbf }

    HINT:
    Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

    NOTICE:
    Do not damage the sensor.



    A209087
  1. Connect the sensor connector and clamp.



2. INSTALL NO. 2 CYLINDER HEAD COVER


    A209050
  1. Attach the 4 clips to install the cover.

    NOTICE:
    1. Be sure to attach the clips securely.
    2. Do not apply excessive force or do not hit the cover to attach the clips. This may cause the cover to break.