Home › ENGINE · 3ZR-FAE › ENGINE CONTROL SYSTEM › THROTTLE BODY

THROTTLE BODY > INSPECTION

for Preparation Click here



1. INSPECT THROTTLE BODY


    A208125E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (M-) - 2 (M+)
    20°C (68°F)
    0.3 to 100 Ω

    Text in Illustration 
    *1
    Component without harness connected
    (Throttle Body Assembly)
    If the result is not as specified, replace the throttle body assembly.