EXHAUST MANIFOLD > REMOVAL |
| 1. REMOVE NO. 2 CYLINDER HEAD COVER |
![]() |
Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.
| 2. REMOVE AIR FUEL RATIO SENSOR |
![]() |
Disconnect the sensor connector and clamp.
![]() |
Using SST, remove the sensor from the exhaust manifold.
| 3. REMOVE WIRE HARNESS CLAMP BRACKET |
![]() |
Detach the clamp and disconnect the fuel hose.
Remove the bolt and bracket.
| 4. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR |
![]() |
Remove the 3 bolts and heat insulator.
| 5. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
![]() |
Remove the 2 bolts and disconnect the front exhaust pipe from the center exhaust pipe.
Remove the gasket from the exhaust pipe.
![]() |
Remove the 2 bolts, 2 compression springs and front exhaust pipe.
| 6. REMOVE MANIFOLD STAY |
![]() |
Remove the 3 bolts and manifold stay.
| 7. REMOVE EXHAUST MANIFOLD |
![]() |
Remove the 5 nuts and exhaust manifold.
Remove the exhaust manifold gasket.
| 8. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR |
![]() |
Remove the 3 bolts and heat insulator.