Home › ENGINE ยท 3ZR-FAE › IGNITION › IGNITION COIL AND SPARK PLUG

IGNITION COIL AND SPARK PLUG > INSTALLATION

for Preparation Click here



1. INSTALL SPARK PLUG


    A205087
  1. Using a 14 mm spark plug wrench and 100 mm extension bar, install the 4 spark plugs.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }



2. INSTALL IGNITION COIL ASSEMBLY


    A205086E01
  1. Install the 4 ignition coils with the 4 bolts.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

    NOTICE:
    When installing the ignition coil, do not damage the plug cap with the cylinder head cover opening or the upper edge of the spark plug tube.

    Text in Illustration 
    *1
    Cylinder Head Cover
    *2
    Spark Plug Tube
    *3
    Plug Cap



    A205085
  1. Connect the 4 ignition coil connectors.



3. INSTALL NO. 2 CYLINDER HEAD COVER


    A209050
  1. Attach the 4 clips to install the cover.

    NOTICE:
    1. Be sure to attach the clips securely.
    2. Do not apply excessive force or do not hit the cover to attach the clips. This may cause the cover to break.