MANUAL TRANSAXLE OIL > REPLACEMENT |
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
![]() |
Remove the 6 screws, 10 clips and under cover.
| 2. DRAIN MANUAL TRANSAXLE OIL |
![]() |
Remove the filler plug and gasket.
| *1 | Filler Plug |
| *2 | Drain Plug |
Remove the drain plug and gasket to drain the manual transaxle oil.
Install a new gasket and the drain plug.
| 3. ADD MANUAL TRANSAXLE OIL |
![]() |
Add oil until the oil level is within 5 mm (0.197 in.) from the bottom of the transmission filler plug opening.
Install a new gasket and the transmission filler plug.
| 4. INSPECT FOR OIL LEAK |
| 5. INSTALL NO. 1 ENGINE UNDER COVER |
![]() |
Install the under cover with the 6 screws and 10 clips.