Home › TRANSMISSION ยท EB61F MANUAL TRANSAXLE › MANUAL TRANSAXLE OIL

MANUAL TRANSAXLE OIL > REPLACEMENT

for Preparation Click here



1. REMOVE NO. 1 ENGINE UNDER COVER


    A206200
  1. Remove the 6 screws, 10 clips and under cover.



2. DRAIN MANUAL TRANSAXLE OIL


    C200386E02
  1. Remove the filler plug and gasket.
    Text in Illustration 
    *1
    Filler Plug
    *2
    Drain Plug

  1. Remove the drain plug and gasket to drain the manual transaxle oil.

  1. Install a new gasket and the drain plug.

    Torque:
    39 N*m{ 400 kgf*cm , 29 ft.*lbf }



3. ADD MANUAL TRANSAXLE OIL


    D025304E41
  1. Add oil until the oil level is within 5 mm (0.197 in.) from the bottom of the transmission filler plug opening.

  1. Install a new gasket and the transmission filler plug.

    Torque:
    39 N*m{ 400 kgf*cm , 29 ft.*lbf }

    NOTICE:
    1. When adding transaxle oil, make sure the vehicle is level.
    2. An excessively large or small amount of oil may cause problems.
    3. After adding oil, drive the vehicle and recheck the oil level.



4. INSPECT FOR OIL LEAK


5. INSTALL NO. 1 ENGINE UNDER COVER


    A206200
  1. Install the under cover with the 6 screws and 10 clips.