Home › ENGINE ยท 3ZR-FAE › ENGINE CONTROL SYSTEM › MANIFOLD ABSOLUTE PRESSURE SENSOR

MANIFOLD ABSOLUTE PRESSURE SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL VACUUM SENSOR ASSEMBLY


    A205093
  1. Connect the No. 1 air hose to the vacuum sensor.

  1. Install the vacuum sensor with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }

  1. Connect the vacuum sensor connector.



2. INSTALL NO. 2 CYLINDER HEAD COVER


    A209050
  1. Attach the 4 clips to install the cover.

    NOTICE:
    1. Be sure to attach the clips securely.
    2. Do not apply excessive force or do not hit the cover to attach the clips. This may cause the cover to break.