Home › BODY › EXTERIOR › FRONT BUMPER (w/ Hood Moulding)

FRONT BUMPER (w/ Hood Moulding) > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET


B253893
  1. Remove the 2 screws and front bumper extension mounting bracket.



2. REMOVE RADIATOR GRILLE SUB-ASSEMBLY


    B254104
  1. Remove the 4 bolts.



    B254103
  1. Remove the 4 nuts.



    B252783
  1. Detach the 4 claws and remove the radiator grille.



3. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM


B252784
  1. Detach the 3 claws and remove the radiator grille (or front panel) emblem.



4. REMOVE LOWER NO. 1 RADIATOR GRILLE


B252785
  1. Detach the 16 claws and remove the lower No. 1 radiator grille.



5. REMOVE FOG LIGHT ASSEMBLY LH


    E207739
  1. Remove the screw and fog light.



6. REMOVE FOG LIGHT ASSEMBLY RH

HINT:
Use the same procedure described for the LH side.



7. REMOVE FRONT BUMPER HOLE COVER ASSEMBLY LH


B252786
  1. Remove the clip.

  1. Detach the 5 claws and remove the front bumper hole cover.



8. REMOVE FRONT BUMPER HOLE COVER ASSEMBLY RH

HINT:
Use the same procedure described for the LH side.



9. REMOVE FRONT BUMPER ARM EXTENSION LH


B252787
  1. Remove the screw and clip.

  1. Detach the claw and remove the front bumper arm extension.



10. REMOVE FRONT BUMPER ARM EXTENSION RH

HINT:
Use the same procedure described for the LH side.



11. REMOVE FRONT BUMPER ARM HOLE COVER LH


B252789
  1. Detach the 2 claws and remove the front bumper arm hole cover.



12. REMOVE FRONT BUMPER ARM HOLE COVER RH

HINT:
Use the same procedure described for the LH side.



13. REMOVE HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


  1. w/o Under Guard:



      E179678
    1. Disconnect the headlight washer hose from the headlight washer actuator.

    2. Detach the 5 clamps and remove the hose from the front bumper.



  1. w/ Under Guard:



      E179679
    1. Disconnect the headlight washer hose from the headlight washer actuator.

    2. Detach the 5 clamps and remove the hose from the front bumper.



  1. w/ Hood Moulding:



      E208561
    1. Disconnect the headlight washer hose from the headlight washer actuator.

    2. Detach the 6 clamps and remove the hose from the front bumper.



14. REMOVE HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    E181256
  1. Extend the headlight cleaner washer nozzle.



    E179681
  1. Detach the 2 claws and remove the headlight cleaner washer nozzle.



15. REMOVE HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

HINT:
Use the same procedure described for the LH side.



16. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


  1. w/o Under Guard, w/ Under Guard:



      E179680
    1. Remove the 2 screws.



    2. E179677
    3. Detach the 2 claws and remove the headlight washer actuator sub-assembly.



  1. w/ Hood Moulding:



      E208562
    1. Remove the clamp as shown in the illustration.



    2. E208563
    3. Pull down the headlight cleaner clamp and remove it.



    4. Detach the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration.


      E208564



    5. E208568
    6. Detach the claw and remove the headlight cleaner clamp as shown in the illustration.



17. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

HINT:
Use the same procedure described for the LH side.



18. REMOVE FRONT BUMPER EXTENSION LH (w/ Over Fender)


B252788
  1. Remove the 7 retainers and front bumper extension.



19. REMOVE FRONT BUMPER EXTENSION RH (w/ Over Fender)

HINT:
Use the same procedure described for the LH side.