FRONT BUMPER (w/ Hood Moulding) > REASSEMBLY |
| 1. INSTALL FRONT BUMPER EXTENSION LH (w/ Over Fender) |
![]() |
Install the front bumper extension with the 7 retainers.
| 2. INSTALL FRONT BUMPER EXTENSION RH (w/ Over Fender) |
| 3. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System) |
w/o Under Guard, w/ Under Guard:
![]() |
Attach the 2 claws to install the headlight washer actuator sub-assembly.
![]() |
Install the headlight washer actuator with the 2 screws.
w/ Hood Moulding:
![]() |
Attach the claw to install the headlight washer actuator sub-assembly with the headlight cleaner clamp as shown in the illustration.
![]() |
Attach the 2 claws as shown in the illustration.
![]() |
Push up the headlight cleaner clamp B to the surface of the bumper.
![]() |
Install the headlight washer actuator sub-assembly with the clamp as shown in the illustration.
| *1 | Clamp |
| *2 | Headlight Washer Actuator Sub-assembly LH |
| *3 | Headlight Cleaner Clamp |
![]() | Push Here |
| 4. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System) |
| 5. INSTALL HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System) |
![]() |
Attach the 2 claws to install the headlight washer nozzle.
| 6. INSTALL HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System) |
| 7. INSTALL HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System) |
w/o Under Guard:
![]() |
Attach the 5 clamps to install the hose to the front bumper.
Connect the clamp to the headlight washer hose.
w/ Under Guard:
![]() |
Attach the 5 clamps to install the hose to the front bumper.
Connect the clamp to the headlight washer hose.
w/ Hood Moulding:
![]() |
Attach the 6 clamps to install the hose to the front bumper.
Connect the clamp to the headlight washer hose.
| 8. INSTALL FRONT BUMPER ARM HOLE COVER LH |
![]() |
Attach the 2 claws to install the front bumper arm hole cover.
| 9. INSTALL FRONT BUMPER ARM HOLE COVER RH |
| 10. INSTALL FRONT BUMPER ARM EXTENSION LH |
![]() |
Attach the claw to install the front bumper arm extension.
Install the clip and screw.
| 11. INSTALL FRONT BUMPER ARM EXTENSION RH |
| 12. INSTALL FRONT BUMPER HOLE COVER ASSEMBLY LH |
![]() |
Attach the 5 claws to install the front bumper hole cover.
Install the clip.
| 13. INSTALL FRONT BUMPER HOLE COVER ASSEMBLY RH |
| 14. INSTALL FOG LIGHT ASSEMBLY LH |
![]() |
Install the fog light with the screw.
| 15. INSTALL FOG LIGHT ASSEMBLY RH |
| 16. INSTALL LOWER NO. 1 RADIATOR GRILLE |
![]() |
Attach the 16 claws to install the lower No. 1 radiator grille.
| 17. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM |
![]() |
Attach the 3 claws to install the radiator grille (or front panel) emblem.
| 18. INSTALL RADIATOR GRILLE SUB-ASSEMBLY |
![]() |
Attach the 4 claws to install the radiator grille.
![]() |
Install the 4 nuts.
![]() |
Install the 4 bolts.
| 19. INSTALL FRONT BUMPER EXTENSION MOUNTING BRACKET |
![]() |
Install the front bumper extension mounting bracket with the 2 screws.