LOW PITCHED HORN (w/ Hood Moulding) > INSTALLATION |
| 1. INSTALL LOW PITCHED HORN ASSEMBLY |
![]() |
Install the horn with the bolt.
Connect the horn connector.
| 2. INSTALL FRONT BUMPER COVER |
![]() |
w/ Headlight Cleaner System:
Connect the headlight cleaner hose.
Connect the 2 fog light connectors.
Attach the 4 claws to install the front bumper cover.
![]() |
w/ Diffuser:
Install the 4 clips and 8 screws.
![]() |
w/o Diffuser:
Install the 4 clips and 8 screws.
![]() |
Position the groove on the pin hold clip vertically and insert the clip to install it.
| 3. INSTALL FRONT FENDER FRONT SPLASH SHIELD LH (w/ Diffuser) |
![]() |
Install the front fender front splash shield with the nut, bolt and screw.
| 4. INSTALL FRONT FENDER FRONT SPLASH SHIELD RH (w/ Diffuser) |
| 5. INSTALL RADIATOR GRILLE PROTECTOR |
![]() |
Install the 3 radiator grille protectors.
| 6. INSTALL RADIATOR SUPPORT OPENING COVER |
![]() |
Install the radiator support opening cover with the 9 clips.