LOW PITCHED HORN (w/ Hood Moulding) > REMOVAL |
| 1. REMOVE RADIATOR SUPPORT OPENING COVER |
![]() |
Remove the 9 clips and radiator support opening cover.
| 2. REMOVE RADIATOR GRILLE PROTECTOR |
![]() |
Remove the 3 radiator grille protectors.
| 3. REMOVE FRONT FENDER FRONT SPLASH SHIELD LH (w/ Diffuser) |
![]() |
Remove the bolt, nut, screw and front fender front splash shield.
| 4. REMOVE FRONT FENDER FRONT SPLASH SHIELD RH (w/ Diffuser) |
| 5. REMOVE FRONT BUMPER COVER |
![]() |
Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.
![]() |
w/ Diffuser:
Remove the 8 screws and 4 clips.
![]() |
w/o Diffuser:
Remove the 10 screws and 4 clips.
![]() |
Put protective tape around the bumper cover.
Detach the 4 claws.
w/ Headlight Cleaner System:
Disconnect the headlight cleaner hose.
Disconnect the 2 fog light connectors and remove the front bumper cover.
| 6. REMOVE LOW PITCHED HORN ASSEMBLY |
![]() |
Disconnect the horn connector.
Remove the bolt and horn.