Component
| Outline
|
Shift solenoid valve DS1
| Controls the oil flow to the primary pulley according to the vehicle speed and accelerator pedal position.
|
Shift solenoid valve DS2
| Controls the oil flow from the primary pulley according to the vehicle speed and accelerator pedal position.
|
Shift solenoid valve SL
| Switches the usage of shift solenoid valve SLS.
|
Shift solenoid valve DSU
| Controls the oil pressure for lock-up clutch engagement.
|
Shift solenoid valve SLS
| Controls belt clamping pressure according to the input torque. Moreover, while the forward and reverse clutch is engaged, it controls the forward and reverse clutch oil pressure.
|
Transmission revolution sensor (NIN)
| Detects the primary pulley revolution speed.
|
Transmission revolution sensor (NOUT)
| Detects the secondary pulley revolution speed.
|
Transmission revolution sensor (NT)
| Detects the input turbine revolution speed.
|
CVT oil temperature sensor
| Detects the CVT fluid temperature.
|
CVT oil pressure sensor
| Detects the CVT oil pressure for belt clamping force.
|
Engine coolant temperature sensor
| Detects the engine coolant temperature.
|
Throttle position sensor
| Detects the opening of the throttle valve.
|
Stop light switch
| Detects the state of the brake pedal.
|
Park/neutral position switch
| Detects the position of the shift lever.
|
ECM
| Controls the transmission based on the signal from each sensor. It has a diagnosis mode and fail-safe functions as a service when the system has malfunctioned.
|
DLC3
| Used for connecting the diagnosis tool to read diagnostic trouble code and ECM data.
|