DTC U0129 Lost Communication with Brake System Control Module |
| DTC Code | DTC Detection Condition
| Trouble Area |
| U0129 |
|
|
| 1.CLEAR DTC AND PERFORM ROAD TEST |
Clear the DTCs (Click here).
Start the engine and drive the vehicle at a low speed.
| NEXT | |
| 2.CHECK DTC OUTPUT (DTC U0129) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Read the DTCs using the tester.
| Result | Proceed to |
| U0129 is not output | A |
| U0129 is output | B |
|
| ||||
| A | ||
| ||