Home › ENGINE ยท 3ZR-FAE › ENGINE MECHANICAL › ENGINE UNIT

ENGINE UNIT > REMOVAL

for Preparation Click here



1. REMOVE THROTTLE BODY ASSEMBLY


    A209054
  1. Disconnect the throttle body connector and 2 water hoses.



    A209055
  1. Remove the 2 bolts, 2 nuts and throttle body.

  1. Remove the gasket.



2. REMOVE INTAKE MANIFOLD


    A207744
  1. Remove the bolt and wire harness clamp bracket.

  1. Detach the 4 clamps and wire harness from the intake manifold.



    A207745
  1. Disconnect the fuel vapor feed hose and ventilation hose.



    A204422
  1. Remove the 5 bolts, 2 nuts, intake manifold stay and intake manifold.



    A173120
  1. Remove the gasket from the intake manifold.



    A207746
  1. Remove the bolt and wire harness clamp bracket from the intake manifold.

  1. Using an E6 "TORX" socket wrench, remove the 2 stud bolts from the intake manifold.



3. REMOVE AIR TUBE


    A209112
  1. Disconnect the fuel vapor feed hose from the purge VSV.

  1. Disconnect the 2 union to connector tube hoses.

  1. Disconnect the No. 2 air hose and No. 1 fuel vapor feed hose.

  1. Remove the 2 bolts and air tube.



4. REMOVE FUEL TUBE SUB-ASSEMBLY


    A209072
  1. Remove the No. 2 fuel pipe clamp.



    A209079E01
  1. Wipe off any dirt on the fuel tube connector.

  1. Hold the fuel tube connector, and then install SST.

    SST
    09268-21010  

  1. Turn SST to align the retainer inside the fuel tube connector with the chamfered part of SST.

  1. Insert SST into the fuel tube and hold it. Then push the fuel tube connector toward SST.

  1. Mount the retainer of the fuel tube connector onto the chamfered part of SST.



    A076220E17
  1. Slide SST and the fuel tube connector together towards the fuel tube until they make a "click" sound, and then disconnect the fuel tube.
    Text in Illustration 
    *1
    O-Ring
    *2
    Retainer
    *3
    Pipe
    *4
    Nylon Tube
    *5
    Fuel Tube Connector

  1. Drain the fuel remaining inside the fuel tube.

  1. Cover the fuel tube and fuel pipe with a plastic bag to protect the disconnected part.



5. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY


    A152570
  1. Remove the bolt and wire harness bracket.



    A153007
  1. Remove the 2 bolts.



    A209080
  1. Remove the bolt and fuel delivery pipe.



    A153008
  1. Remove the 2 No. 1 delivery pipe spacers.



6. REMOVE FUEL INJECTOR ASSEMBLY


    A153009
  1. Pull the 4 fuel injector assemblies out of the fuel delivery pipe sub-assembly.



    A171499
  1. For reinstallation, attach a tag or label to the injector shaft.

    NOTICE:
    Prevent entry of foreign objects by covering the fuel injector with plastic bags.



    A153010
  1. Remove the 4 injector vibration insulators.



7. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    A154921
  1. Remove the engine oil level dipstick.

  1. Remove the bolt and dipstick guide.

  1. Remove the O-ring from the dipstick guide.



8. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    A207698
  1. Remove the 3 bolts and heat insulator.



9. REMOVE MANIFOLD STAY


    A207701
  1. Remove the 3 bolts and manifold stay.



10. REMOVE EXHAUST MANIFOLD


    A207702
  1. Remove the 5 nuts and exhaust manifold.

  1. Remove the exhaust manifold gasket.



11. REMOVE NO. 3 WATER BY-PASS PIPE (for CVT)


    A173163
  1. Remove the 2 nuts, water by-pass pipe and gasket.



12. REMOVE VENTILATION HOSE
  1. Remove the ventilation hose from the ventilation valve.



13. DISCONNECT NO. 3 WATER BY-PASS HOSE


    A206148
  1. Disconnect the No. 3 water by-pass hose from the water inlet housing.



14. REMOVE WATER BY-PASS HOSE


    A206175
  1. Remove the clamp and water by-pass hose.



15. REMOVE WATER INLET HOSE


    A154919
  1. Remove the 2 clamps and water inlet hose.



16. REMOVE NO. 1 WATER BY-PASS PIPE


    A177452
  1. Remove the 2 bolts and water by-pass pipe.



17. REMOVE WATER INLET


    A207904
  1. Remove the 2 nuts and disconnect the water inlet.



18. REMOVE THERMOSTAT


    A157637
  1. Remove the thermostat.

  1. Remove the gasket from the thermostat.



19. REMOVE IGNITION COIL ASSEMBLY


    A205085
  1. Disconnect the 4 ignition coil connectors.



    A205086E01
  1. Remove the 4 bolts and 4 ignition coils.

    NOTICE:
    When removing the ignition coil, do not damage the plug cap with the cylinder head cover opening or the upper edge of the spark plug tube.

    Text in Illustration 
    *1
    Cylinder Head Cover
    *2
    Spark Plug Tube
    *3
    Plug Cap



20. REMOVE RADIO SETTING CONDENSER


    A156266
  1. Remove the bolt and setting condenser.



21. REMOVE VACUUM PUMP ASSEMBLY


    C197845
  1. Remove the 3 bolts and vacuum pump from the engine.



    C197846
  1. Remove the 2 O-rings from the vacuum pump.



22. REMOVE NO. 1 VACUUM PUMP BRACKET


    A172102
  1. Remove the 2 bolts, vacuum pump bracket and gasket.