SHIFT PADDLE SWITCH > INSTALLATION |
| 1. INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY LH AND RH |
![]() |
Connect the No. 1 switch wire connectors to the LH and RH transmission shift switches and install a new cable tie to each switch at the location shown in the illustration to secure the wire in place.
![]() |
Install the LH and RH transmission shift switches to the steering wheel with the 2 screws.
![]() |
Pass the switch wire through the grooves of the lower steering boss cover.
| 2. INSTALL STEERING PAD SWITCH ASSEMBLY |
![]() |
w/ Bluetooth:
Attach the 2 pins to install the 2 steering pad switches, and then install the 2 screws.
w/o Bluetooth:
Attach the 2 pins to install the steering pad switch and steering wheel ornament, and then install the 2 screws.
Connect the transmission shift switch connector and attach the steering pad switch harness connector to the steering wheel.
| 3. INSTALL STEERING WHEEL ASSEMBLY (for LHD) |
![]() |
Align the matchmarks and install the steering wheel to the steering column.
Install the nut.
Connect all the connectors to the spiral cable.
| 4. INSTALL STEERING WHEEL ASSEMBLY (for RHD) |
![]() |
Align the matchmarks and install the steering wheel to the steering column.
Install the nut.
Connect all the connectors to the spiral cable.
| 5. INSTALL STEERING WHEEL PAD ASSEMBLY |
Install the steering wheel pad (Click here).
| 6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
| 7. CHECK SRS WARNING LIGHT |
Check the SRS warning light (Click here).