Home › ENGINE ยท 3ZR-FAE › CHARGING › BATTERY CURRENT SENSOR

BATTERY CURRENT SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL BATTERY CURRENT SENSOR ASSEMBLY


    A210041E01
  1. Connect the No. 2 engine wire to the battery positive (+) terminal.
    Text in Illustration 
    *1
    No. 3 Engine Wire
    *2
    No. 2 Engine Wire

  1. Connect the connector to the battery current sensor.

  1. Insert the No. 3 engine wire into the battery current sensor and install the No. 3 engine wire and battery current sensor to the battery positive (+) terminal with the nut.

    Torque:
    7.6 N*m{ 77 kgf*cm , 67 in.*lbf }



2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL