Home › ENGINE ยท 3ZR-FAE › CHARGING › BATTERY CURRENT SENSOR

BATTERY CURRENT SENSOR > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE BATTERY CURRENT SENSOR ASSEMBLY


    A210920E01
  1. Disconnect the No. 2 engine wire, No. 3 engine wire and battery current sensor from the battery positive (+) terminal.
    Text in Illustration 
    *1
    No. 3 Engine Wire
    *2
    No. 2 Engine Wire

  1. Disconnect the connector from the battery current sensor.

  1. Pull out the engine room main wire from the battery current sensor to remove the sensor.