Home › Engine / Hybrid System › 2AR-FE ENGINE CONTROL › SFI SYSTEM
NM30B0U _51 Engine / Hybrid System _008617 2AR-FE ENGINE CONTROL _0048043 SFI SYSTEM CO CONTROL F

2AR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  DUAL VVT-i CONTROL  


FUNCTION


a.

The Dual VVT-i system is designed to control the intake and exhaust camshafts within a range of 40° respectively (of Crankshaft Angle) to provide valve timing optimally suited to the engine condition. This improves torque in all the speed ranges as well as increasing fuel economy and reducing exhaust emissions.

W110945
1.094,1.115 1.406,1.271 0.313,0.156 10 *1 1.729,1.354 2.042,1.51 0.313,0.156 10 *2 0.802,3.802 1.115,3.958 0.313,0.156 10 *3 4.115,2.073 4.427,2.229 0.313,0.156 10 *4 3.99,1.063 4.302,1.219 0.313,0.156 10 *5 3.51,0.813 3.823,0.969 0.313,0.156 10 *6 5.438,2.281 5.75,2.438 0.313,0.156 10 *7 5.49,3.24 5.802,3.396 0.313,0.156 10 *8
*1 Camshaft Timing Oil Control Valve Assembly (Intake) *2 Camshaft Timing Oil Control Valve Assembly (Exhaust)
*3 Crank Position Sensor *4 Engine Coolant Temperature Sensor
*5 Camshaft Position Sensor (Exhaust) *6 Camshaft Position Sensor (Intake)
*7 ECM *8
·

Intake Mass Air Flow Meter Sub-assembly

·

Throttle Position Sensor




W110946
3.094,1.917 2.885,1.552 2.885,1.552 2.479,1.552 true 4.063,1.927 4.219,1.188 4.219,1.188 4.698,1.188 true 4.354,4.01 4.646,4.333 4.646,4.333 4.823,4.333 true 2.708,3.938 2.448,4.26 2.448,4.26 2.073,4.26 true 0.427,0.542 2.24,0.938 1.813,0.396 10 false : Intake valve opening angle 0.406,1.073 2.583,1.417 2.177,0.344 10 false : Exhaust valve opening angle 0.542,1.469 2.49,1.771 1.948,0.302 10 false VVT-i Operation Range (Intake) 4.781,1.115 6.885,1.469 2.104,0.354 10 false VVT-i Operation Range (Exhaust) 3.448,1.198 3.771,1.396 0.323,0.198 10 false TDC 3.448,4.531 3.906,4.729 0.458,0.198 10 false BDC 2.427,1.844 2.688,2.042 0.26,0.198 10 false 43° 3.667,1.469 3.927,1.667 0.26,0.198 10 false 4° 3.406,1.458 3.667,1.656 0.26,0.198 10 false 3° 2.083,3.729 2.344,3.927 0.26,0.198 10 false 61° 2.906,4.458 3.167,4.656 0.26,0.198 10 false 21° 4.021,4.438 4.281,4.635 0.26,0.198 10 false 20° 4.885,3.76 5.146,3.958 0.26,0.198 10 false 60° 4.594,1.896 4.854,2.094 0.26,0.198 10 false 44° 4.875,4.24 6.948,4.552 2.073,0.313 10 false VVT-i Operation Range (Exhaust) 0.167,4.198 2.146,4.521 1.979,0.323 10 false VVT-i Operation Range (Intake) 0.052,0.042 1.031,0.396 0.979,0.354 10 false Valve Timing


b.

The VVT-i system delivers excellent benefits in the different operating conditions as follows:

i.

During Idling

W110947
0.458,0.083 1.146,0.385 0.688,0.302 10 : Intake 0.448,0.438 1.229,0.781 0.781,0.344 10 : Exhaust 3.448,0.083 3.906,0.281 0.458,0.198 10 TDC 3.458,1.542 3.917,1.74 0.458,0.198 10 BDC 1.5,0.438 3.073,0.854 1.573,0.417 10 Earliest Timing (Exhaust) 4.177,0.479 5.583,0.813 1.406,0.333 10 Latest Timing (Intake)

Objective Effect
Reducing overlap to reduce blow back to the intake side
·

Stabilized idling speed

·

Better fuel economy




ii.

At Light Load

W110948
0.49,0.083 1.698,0.427 1.208,0.344 10 : Intake 0.469,0.427 1.167,0.729 0.698,0.302 10 : Exhaust 1.458,0.208 3.177,0.604 1.719,0.396 10 To Advance Side (Exhaust) 4.063,0.208 5.573,0.542 1.51,0.333 10 To Retard Side (Intake) 3.438,0.021 3.896,0.219 0.458,0.198 10 TDC 3.479,1.542 3.938,1.74 0.458,0.198 10 BDC

Objective Effect
Reducing overlap to reduce blow back to the intake side Ensured engine stability


iii.

At Medium Load

W110949
0.469,0.083 1.594,0.406 1.125,0.323 10 : Intake 0.469,0.438 1.24,0.771 0.771,0.333 10 : Exhaust 1.604,0.167 3.167,0.573 1.563,0.406 10 To Advance Side (Intake) 4.094,0.188 5.708,0.573 1.615,0.385 10 To Retard Side (Exhaust) 3.469,0.021 3.927,0.219 0.458,0.198 10 TDC 3.49,1.542 3.948,1.74 0.458,0.198 10 BDC

Objective Effect
Increasing overlap to increase internal EGR to reduce pumping loss
·

Better fuel economy

·

Improved emission control




iv.

In Low to Medium Speed Range with Heavy Load

W110950
0.479,0.073 1.458,0.417 0.979,0.344 10 : Intake 0.479,0.438 1.156,0.813 0.677,0.375 10 : Exhaust 1.594,1.208 3.219,1.594 1.625,0.385 10 To Retard Side (Exhaust) 4.021,1.271 5.635,1.708 1.615,0.438 10 To Advance Side (Intake) 3.458,0.083 3.917,0.281 0.458,0.198 10 TDC 3.458,1.583 3.917,1.75 0.458,0.167 10 BDC

Objective Effect
Advancing the intake valve close timing for volumetric efficiency improvement Improved torque in low to medium speed range


v.

In High Speed Range with Heavy Load

W110951
0.479,0.094 1.615,0.427 1.135,0.333 10 : Intake 0.469,0.438 1.208,0.792 0.74,0.354 10 : Exhaust 1.781,1.333 3.219,1.708 1.438,0.375 10 To Retard Side (Intake) 3.958,1.365 5.688,1.719 1.729,0.354 10 To Advance Side (Exhaust) 3.458,0.073 3.917,0.271 0.458,0.198 10 TDC 3.458,1.615 3.906,1.76 0.448,0.146 10 BDC

Objective Effect
Retarding the intake valve close timing for volumetric efficiency improvement Improved output


vi.

At Low Temperatures

W110947
0.458,0.083 1.146,0.385 0.688,0.302 10 : Intake 0.448,0.438 1.229,0.781 0.781,0.344 10 : Exhaust 3.448,0.083 3.906,0.281 0.458,0.198 10 TDC 3.458,1.542 3.917,1.74 0.458,0.198 10 BDC 1.5,0.438 3.073,0.854 1.573,0.417 10 Earliest Timing (Exhaust) 4.177,0.479 5.583,0.813 1.406,0.333 10 Latest Timing (Intake)

Objective Effect
Reducing overlap to reduce blow back to the intake side leads to the lean burning condition, and stabilizes the idling speed at fast idle
·

Stabilized fast idle speed

·

Better fuel economy




vii.

Starting Engine and Stopping Engine

W110947
0.458,0.083 1.146,0.385 0.688,0.302 10 : Intake 0.448,0.438 1.229,0.781 0.781,0.344 10 : Exhaust 3.448,0.083 3.906,0.281 0.458,0.198 10 TDC 3.458,1.542 3.917,1.74 0.458,0.198 10 BDC 1.5,0.438 3.073,0.854 1.573,0.417 10 Earliest Timing (Exhaust) 4.177,0.479 5.583,0.813 1.406,0.333 10 Latest Timing (Intake)

Objective Effect
Reducing overlap to minimize blow back to the intake side Improved startability