Home › Engine / Hybrid System › 2AR-FE ENGINE CONTROL › SFI SYSTEM
NM30B0U _51 Engine / Hybrid System _008617 2AR-FE ENGINE CONTROL _0048043 SFI SYSTEM CO CONTROL F

2AR-FE ENGINE CONTROL  SFI SYSTEM  CONTROL  STARTER CONTROL (CRANKING HOLD FUNCTION)  


FUNCTION


a.

Once the engine switch is pressed, this function operates the starter until the engine starts, provided that the brake pedal is depressed and the shift lever is in P or N. This prevents application of the starter for an inadequate length of time and also prevents the engine from being cranked after it has started.


b.

When the certification ECU detects a start signal, it monitors the engine speed signal (NE) from the ECM and operates the starter continuously until it determines that the engine has started completely.