Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › ENGINE UNIT
NM30B0U _51 Engine / Hybrid System _008616 2AR-FE ENGINE MECHANICAL _0050891 ENGINE UNIT DE DETAILS F

2AR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  PISTON  


CONSTRUCTION


a.

The piston is made of aluminum alloy and the skirt area is made compact and lightweight.


b.

The piston head portion uses a taper squish shape to improve the fuel combustion efficiency.


c.

The piston skirt has been coated with resin to reduce the friction loss.


d.

The groove of the top ring is coated with anodic oxide to improve wear resistance and corrosion resistance.


e.

Low-tension piston rings are used to reduce friction and achieve excellent fuel economy.


f.

Narrow-width piston rings are used to reduce weight and friction.


g.

A No. 1 compression ring with an inside bevel shape is used.


h.

A Physical Vapor Deposition (PVD) coating has been applied to the surface of the No. 1 compression ring in order to improve its wear resistance.

W111539
1.594,0.375 1.771,0.375 1.771,0.375 1.854,0.479 true 1.375,0.885 1.521,0.885 1.521,0.885 1.792,0.771 true 1.406,1.354 1.552,1.354 1.552,1.354 1.823,1.24 true 5.49,0.177 5.271,0.177 5.271,0.177 5.104,0.292 true 3.396,0.292 3.219,0.292 3.219,0.292 3.177,0.448 true 1.969,1.646 2.156,1.646 2.156,1.646 2.271,1.427 true 1.781,1.563 2.094,1.719 0.313,0.156 10 *1 5.198,0.344 5.51,0.5 0.313,0.156 10 *2 5.208,0.771 5.521,0.927 0.313,0.156 10 *3 5.229,1.302 5.542,1.458 0.313,0.156 10 *4 1.406,0.271 1.719,0.427 0.313,0.156 10 *a 1.177,0.781 1.49,0.938 0.313,0.156 10 *b 1.219,1.25 1.531,1.406 0.313,0.156 10 *c 5.531,0.115 5.844,0.271 0.313,0.156 10 *d 3.438,0.198 3.75,0.354 0.313,0.156 10 *a
*1 Piston *2 No. 1 Compression Ring
*3 No. 2 Compression Ring *4 Oil Ring
*a Taper Squish Shape *b Anodic Oxide Coating
*c Resin Coating *d PVD Coating