Home › Engine / Hybrid System › 2AR-FE ENGINE MECHANICAL › ENGINE UNIT
NM30B0U _51 Engine / Hybrid System _008616 2AR-FE ENGINE MECHANICAL _0050891 ENGINE UNIT DE DETAILS F

2AR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVE LASH ADJUSTER  


CONSTRUCTION


a.

The valve lash adjuster assembly, which is located at the fulcrum of the valve rocker arm sub-assembly, consists primarily of a plunger, plunger spring, check ball and check ball spring.


b.

The engine oil supplied by the cylinder head and the built-in spring actuates the valve lash adjuster assembly. The oil pressure and the spring force that act on the plunger push the valve rocker arm sub-assembly against the cam, in order to adjust the valve clearance that is created during the opening and closing of the valve. As a result, engine noise has been reduced.

W111547
1.771,0.188 2,0.188 2,0.188 2.198,0.719 true 1.052,0.635 1.385,0.635 1.385,0.635 2.073,1.083 true 3.24,1.802 3.021,1.802 3.021,1.802 2.458,1.458 true 3.552,0.698 3.344,0.698 3.344,0.698 2.438,1.271 true 4.531,0.333 4.75,0.333 4.75,0.333 5.031,0.583 true 4.635,1.719 4.813,1.719 4.813,1.719 5.156,1.938 true 4.563,2.198 4.75,2.198 4.75,2.198 5.156,2.052 true 5.781,2.375 5.615,2.375 5.615,2.375 5.302,2.167 true 5.969,1.573 5.802,1.573 5.802,1.573 5.49,1.365 true 1.625,0.115 1.938,0.271 0.313,0.156 10 *1 0.885,0.552 1.198,0.708 0.313,0.156 10 *2 3.271,1.74 3.583,1.896 0.313,0.156 10 *3 3.573,0.646 3.885,0.802 0.313,0.156 10 *4 4.354,0.26 4.667,0.417 0.313,0.156 10 *5 4.448,1.635 4.76,1.792 0.313,0.156 10 *6 4.365,2.115 4.677,2.271 0.313,0.156 10 *7 5.802,2.292 6.115,2.448 0.313,0.156 10 *8 5.979,1.5 6.292,1.656 0.313,0.156 10 *3
*1 Cam *2 Valve Rocker Arm Sub-assembly
*3 Oil Passage *4 Valve Lash Adjuster Assembly
*5 Plunger *6 Check Ball
*7 Check Ball Spring *8 Plunger Spring