Home › Engine / Hybrid System › 2AR-FE EMISSION CONTROL › EMISSION CONTROL SYSTEM
NM30B0U _51 Engine / Hybrid System _008619 2AR-FE EMISSION CONTROL _0050893 EMISSION CONTROL SYSTEM CO CONTROL F

2AR-FE EMISSION CONTROL  EMISSION CONTROL SYSTEM  CONTROL  EXHAUST EMISSION CONTROL  


FUNCTION OF MAIN COMPONETS


a.

The main components of the exhaust emission control system are as follows:

Component Function
ECM Determines an optimal fuel injection volume based on the signals from various sensors.
TWC Oxidizes CO and HC in the exhaust gas and deoxidizes NOx at the same time to purify them into CO2, H2O and N2.
Air Fuel Ratio Sensor These sensors detect the oxygen concentration in the exhaust emissions by measuring the electromotive force which is generated in the sensor itself. For details, see the 2AR-FE ENGINE CONTROL section.
[SFI SYSTEM > AIR FUEL RATIO SENSOR AND HEATED OXYGEN SENSOR(Click here)]
Air Fuel Ratio Sensor