Home › Engine / Hybrid System › 2AR-FE LUBRICATION › LUBRICATION SYSTEM
NM30B0U _51 Engine / Hybrid System _008622 2AR-FE LUBRICATION _0050897 LUBRICATION SYSTEM GE GENERAL F

2AR-FE LUBRICATION  LUBRICATION SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The lubrication circuit is fully pressurized and oil passes through an oil filter.


b.

This engine has an oil return system in which the oil is force-fed to the upper cylinder head and returns to the oil pan through the oil return hole in the cylinder head.


c.

A cycloid rotor type oil pump is used. The oil pump is directly driven by the crankshaft.


d.

The Dual VVT-i system is used. This system is operated by the engine oil.

W111556
2.281,0.844 2.063,0.531 2.063,0.531 1.844,0.531 true 2.719,1.063 2.552,0.375 2.552,0.375 2.281,0.375 true 2.104,1.344 1.885,1.031 1.885,1.031 1.667,1.031 true 2.604,1.865 1.74,2.25 1.74,2.25 1.552,2.25 true 2.25,2.906 1.917,3.104 1.917,3.104 1.667,3.104 true 2.583,3.76 2.25,3.958 2.25,3.958 2,3.958 true 3.219,4.24 3.073,4.448 3.073,4.448 2.875,4.448 true 3.844,3.875 4.198,4.292 4.198,4.292 4.396,4.292 true 4.479,2.802 5.156,3.583 5.156,3.583 5.385,3.583 true 4.677,1.552 5.406,2.021 5.406,2.021 5.646,2.021 true 4.656,0.969 4.885,0.458 4.885,0.458 5.198,0.458 true 2.083,0.292 2.396,0.448 0.313,0.156 10 *1 1.667,0.448 1.979,0.604 0.313,0.156 10 *2 1.51,0.958 1.823,1.115 0.313,0.156 10 *3 1.365,2.177 1.677,2.333 0.313,0.156 10 *4 1.479,3.01 1.792,3.167 0.313,0.156 10 *5 1.813,3.875 2.125,4.031 0.313,0.156 10 *6 2.719,4.365 3.031,4.521 0.313,0.156 10 *7 4.448,4.208 4.76,4.365 0.313,0.156 10 *8 5.438,3.521 5.75,3.677 0.313,0.156 10 *9 5.698,1.938 6.167,2.094 0.469,0.156 10 *10 5.24,0.385 5.708,0.542 0.469,0.156 10 *11
*1 Camshaft Timing Oil Control Valve Assembly (Exhaust) *2 Camshaft Timing Oil Control Valve Assembly (Intake)
*3 Intake VVT-i Controller *4 Exhaust VVT-i Controller
*5 Chain Tensioner *6 Oil Pump
*7 Oil Filter *8 Balance Shaft
*9 Oil Nozzle Sub-assembly *10 Valve Lash Adjuster Assembly
*11 Oil Delivery Pipe - -