Home › Power Source / Network › 2AR-FE BATTERY / CHARGING › CHARGING SYSTEM
NM30B0U _57 Power Source / Network _009871 2AR-FE BATTERY / CHARGING _0054282 CHARGING SYSTEM DE DETAILS F

2AR-FE BATTERY / CHARGING  CHARGING SYSTEM  DETAILS  BATTERY CURRENT SENSOR  


CONSTRUCTION


a.

The generator control ECU assembly installed on the negative (-) terminal of the battery detects the battery charge and discharge current and calculates the battery capacity.


b.

A shunt resistor is used for detection of the charge and discharge current. The battery charge and discharge current is converted and calculated by measuring the voltage drop across the shunt resistor.

Y131148
4.427,1.563 6.198,1.896 true 6.281,1.844 6.594,2.042 0.313,0.198 10 false *1 0.333,2.438 0.646,2.635 0.313,0.198 10 false *a
*1 Generator Control ECU Assembly - -
*a This illustration is shown as an example. - -