Home › Power Source / Network › 2AR-FE BATTERY / CHARGING › CHARGING SYSTEM
NM30B0U _57 Power Source / Network _009871 2AR-FE BATTERY / CHARGING _0054282 CHARGING SYSTEM DE DETAILS F

2AR-FE BATTERY / CHARGING  CHARGING SYSTEM  DETAILS  BATTERY TEMPERATURE SENSOR  


CONSTRUCTION


a.

The battery temperature sensor is built into the generator control ECU assembly.


b.

The battery characteristic (battery internal resistance) of taking in current for charging varies according to battery electrolyte temperature. If the electrolyte temperature is too low or too high, the battery internal resistance will increase, resulting in early deterioration. To prevent this, the battery temperature sensor sends the temperature to generator control ECU assembly.