Home › General › INTRODUCTION › FEATURES
NM30B0U _V1 General _008624 INTRODUCTION _0057941 FEATURES GE GENERAL F

INTRODUCTION  FEATURES  GENERAL  PERFORMANCE  


OUTLINE


a.

2AR-FE Engine

i.

The 2AR-FE engine is an in-line, 4-cylinder, 2.5-liter, 16-valve DOHC engine. This engine uses the Dual Variable Valve Timing-intelligent (Dual VVT-i) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS) and Electronic Throttle Control System-intelligent (ETCS-i). It has been developed to achieve high performance, quietness, fuel economy and clean emissions.

Engine Type 2AR-FE
Item No. of Cyls. and Arrangement 4-cylinder, In-line
Valve Mechanism 16-valve DOHC, Chain Drive (with Dual VVT-i)
Displacement 2494 cm3 (152.2 cu. in.)
Max. Output [SAE-NET]* 131 kW @ 6000 rpm (176 HP @ 6000 rpm)
Max. Torque [SAE-NET]* 233 N*m @ 4100 rpm (172 ft.*lbf @ 4100 rpm)

HINT:

*: Maximum output and torque rating are determined by revised SAE J1349 standard.




b.

Automatic Transaxle

i.

U760E and U760F 6-speed automatic transaxles are used.



c.

Suspension

i.

A MacPherson strut type independent suspension is used for the front.


ii.

A double-wishbone type independent suspension is used for the rear.



d.

Brake

i.

A ventilated disc brake is provided for the front brake.


ii.

A drum-in type solid disc brake is provided for the rear brake.


iii.

The following brake control functions are provided: Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), brake assist, Auto LSD, Traction Control (TRAC) and Vehicle Stability Control (VSC).



e.

Steering

i.

A rack and pinion type steering gear assembly is used.


ii.

An Electric Power Steering (EPS) system is used.


iii.

A manual tilt and telescopic mechanism is used.