Home › Vehicle Exterior › DOOR / HATCH › POWER BACK DOOR SYSTEM
NM30B0U _59 Vehicle Exterior _008918 DOOR / HATCH _0058709 POWER BACK DOOR SYSTEM GE GENERAL F

DOOR / HATCH  POWER BACK DOOR SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The power back door system enables the back door to be opened and closed automatically by a motor in accordance with signals from the back door control switch or the power back door button on an electrical key transmitter sub-assembly. In addition, a door control switch assembly has been provided on the back door for convenience.


b.

A spindle type power back door is used to achieve improved rearward visibility. Also, the user can set the opening angle of the back door in the preferences. For example, if the garage has a low ceiling, the opening angle of the back door can be set not to hit the ceiling.


c.

This system is controlled by the power back door ECU.



PRECAUTION


a.

Ignition Switch Expressions

i.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch
(Position)
Engine Switch
(Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)