Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SMART KEY SYSTEM
NM30B0U _58 Vehicle Interior _008913 THEFT DETERRENT / KEYLESS ENTRY _0058728 SMART KEY SYSTEM DE DETAILS F

THEFT DETERRENT / KEYLESS ENTRY  SMART KEY SYSTEM  DETAILS  CERTIFICATION ECU  


CONSTRUCTION


a.

The certification ECU includes the IG1 relay and IG2 relay actuation circuits, CPU and hold circuit.


b.

The hold circuit is provided to prevent the power supply to the relays from being cut off when an abnormality occurs in the IG1 relay and/or IG2 relay actuation circuits while driving.

Y113482
0.813,2.5 1.271,2.698 0.458,0.198 10 false CPU 2.052,1.188 3.781,1.5 1.729,0.313 10 false IG1 Relay Actuation Circuit 2.51,2.531 3.313,2.885 0.802,0.354 10 false Hold Circuit 2.719,3.604 3.958,4.063 1.24,0.458 10 false IG2 Relay Actuation Circuit 1.385,4.479 4.208,4.781 2.823,0.302 10 false Certification ECU (Smart Key ECU Assembly) 5.792,1.51 6.594,1.865 0.802,0.354 10 false IG1 Relay 5.781,4.156 6.583,4.51 0.802,0.354 10 false IG2 Relay

HINT:

The certification ECU constantly stores the present power source mode in its memory. Therefore, if the power to the certification ECU is interrupted due to the removal of the battery, the certification ECU restores the power source after the battery is reconnected. For this reason, if the battery is removed when the power source is in a mode other than off, the power will be restored to the vehicle at the same time the power is restored to the certification ECU by reconnecting the battery. Therefore, before removing the battery, be sure to turn the power source off.