OUTLINE
The smart key system has the following main functions, making it a very user-friendly system:
| Function | Outline | |
|---|---|---|
| Start Function | The start function is operated by simply pressing the engine switch while carrying the electrical key transmitter sub-assembly. When the engine switch is pressed, the certification ECU turns on/off the ACC relay, IG1 relay and IG2 relay to switch the power source pattern.
·
The power source mode changes depending on the depression of the brake pedal and the shift lever position. |
|
| Immobiliser | The immobiliser function compares the ID code registered in the certification ECU with the ID code of the transponder chip embedded in the electrical key transmitter sub-assembly. | |
| Steering Lock | The steering lock function is operated to lock and unlock the steering wheel by using a lock/unlock motor in the steering column assembly. | |
| Entry Function | Entry Unlock:
·
All doors are unlocked by grabbing the front outside door handle assembly. Entry Lock: ·
Touching the lock sensor of the front outside door handle assembly or the lock switch of the back door will cause all doors to lock. |
|
| Entry Back Door Open | The entry back door open can be operated manually by simply pressing the back door opener switch. | |
| Wireless Door Lock Control | The wireless door lock control function is a convenient system for locking and unlocking all the doors and the back door at a distance. The basic operation is the same as that of the wireless door lock control system. | |