FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| Main Body ECU (Multiplex Network Body ECU) | The main body ECU receives various signals and illuminates the high beam headlight via daytime running light module. | |
| Headlight Dimmer Switch Assembly | Light Control Switch | The light control switch outputs a light control signal and transmits it to the main body ECU. |
| ECM | The ECM outputs an engine speed signal and transmits it to the main body ECU. | |
SYSTEM CONTROL
The daytime running light system is enabled when the conditions given below are met:
| Condition | Ignition switch is ON. |
| Light control switch is in off*1 or DRL*2 or AUTO*3 position (when taillight is not being controlled by the automatic light control system). | |
| Engine is running. | |
| Parking brake is off. |
*1: Except models for U.S.A.
*2: Models for U.S.A.
*3: Models with automatic light control system