Home › Drivetrain › AXLE AND DIFFERENTIAL › AXLE SYSTEM
NM30B0U _52 Drivetrain _008841 AXLE AND DIFFERENTIAL _0060889 AXLE SYSTEM GE GENERAL F

AXLE AND DIFFERENTIAL  AXLE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Front Axle

i.

Compact and highly rigid double-row angular ball bearings are used. The double-row angular ball bearings and the axle hub are integrated to ensure high rigidity, thus achieving excellent driving stability and braking stability.


ii.

The speed sensor rotor is integrated in the bearing inner race.


iii.

A 12-point lock nut is used and staked in order to ensure that the axle hub is properly tightened. Once removed, this nut cannot be reused.

X111820
2.229,1.083 3.573,1.573 true 2.281,2.646 3.49,2.229 true 3.979,1.625 4.823,1.385 true 4.135,1.99 4.813,2.313 true 2.042,0.979 2.354,1.135 0.313,0.156 10 false *1 2.115,2.583 2.427,2.74 0.313,0.156 10 false *2 4.865,2.26 5.177,2.417 0.313,0.156 10 false *3 4.854,1.281 5.167,1.438 0.313,0.156 10 false *4
*1 Double-row Angular Ball Bearing *2 Speed Sensor Rotor
*3 Lock Nut (12-point) *4 Front Axle Hub


NOTICE:
·

Do not place magnetized objects close to the surface of the sensor rotor.

·

Do not allow any iron particles, iron sand, dust, debris or oil to come in contact with the surface of the sensor rotor.





b.

Rear Axle

i.

Compact and highly rigid double-row angular ball bearings are used. The double-row angular ball bearings and the axle hub are integrated to ensure high rigidity, thus achieving excellent driving stability and braking stability.


ii.

The speed sensor rotor is integrated in the bearing inner race.


iii.

A 12-point lock nut is used on the AWD models and staked in order to ensure that the axle hub is properly tightened. Once removed, this nut cannot be reused.

X111822
1.948,1.583 2.667,1.167 true 2.167,2.167 2.667,2.5 true 1.448,2.125 0.75,2.5 true 1.115,1.688 0.75,1.333 true 5.521,1.531 6.25,1.167 true 5.75,2.167 6.25,2.5 true 5.083,2.198 4.417,2.583 true 6.25,2.167 5.917,2 true 0.292,0.24 0.604,0.49 0.313,0.25 12 *A: 3.802,0.24 4.104,0.479 0.302,0.24 12 *B: 0.583,1.208 0.896,1.365 0.313,0.156 10 *1 0.583,2.448 0.896,2.604 0.313,0.156 10 *2 2.719,2.448 3.031,2.604 0.313,0.156 10 *3 2.708,1.063 3.021,1.219 0.313,0.156 10 *4 6.313,2.115 6.625,2.271 0.313,0.156 10 *5 4.25,2.531 4.563,2.688 0.313,0.156 10 *2 6.292,1.073 6.604,1.229 0.313,0.156 10 *4 6.313,2.458 6.625,2.615 0.313,0.156 10 *3
*A 2WD Models *B AWD Models
*1 Speed Sensor *2 Speed Sensor Rotor
*3 Rear Axle Hub *4 Double-row Angular Ball Bearing
*5 Lock Nut (12-point) - -


NOTICE:
·

Do not place magnetized objects close to the surface of the sensor rotor.

·

Do not allow any iron particles, iron sand, dust, debris or oil to come in contact with the surface of the sensor rotor.