Home › Drivetrain › U760E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM
NM30B0U _52 Drivetrain _008837 U760E AUTOMATIC TRANSMISSION / TRANSAXLE _0060947 AUTOMATIC TRANSAXLE SYSTEM DE DETAILS F

U760E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  DETAILS  CENTRIFUGAL FLUID PRESSURE CANCELING MECHANISM  


CONSTRUCTION


a.

For the following reason, a centrifugal fluid pressure canceling mechanism is used on the No. 1 clutch (C1) and No. 2 clutch (C2):


b.

The clutch shifting operation is affected not only by the valve body controlling fluid pressure but also by the centrifugal fluid pressure from the fluid that is present in the clutch piston oil pressure chamber (chamber A). The centrifugal fluid pressure canceling mechanism uses chamber B to reduce the effects of the centrifugal fluid pressure caused by the fluid in chamber A. As a result, smooth shifting with excellent response is achieved.

X112023
1.448,1.781 0.552,1.427 true 1.313,2.479 0.552,2.917 true 1.958,0.833 1.958,1.25 true 2.719,0.844 2.615,1.354 true 0.385,1.313 0.698,1.469 0.313,0.156 10 false *1 0.396,2.865 0.708,3.021 0.313,0.156 10 false *2 2.667,0.656 2.979,0.813 0.313,0.156 10 false *3 1.885,0.646 2.198,0.802 0.313,0.156 10 false *4
*1 No. 2 Clutch (C2) Piston *2 No. 1 Clutch (C1) Piston
*3 No. 2 Clutch (C2) *4 No. 1 Clutch (C1)
V100144

Chamber A
V100145

Chamber B



c.

Chamber B is filled by fluid supplied to the shaft for lubrication. As a result of filling chamber B, the same amount of fluid pressure is present on both sides of the piston due to centrifugal force. This cancels the effects of fluid pressure on the piston caused by centrifugal force. Accordingly, it is not necessary to discharge the fluid through the use of a check ball, and highly responsive and smooth shifting characteristics are achieved.

X100592
3.823,0.302 3.99,0.302 3.99,0.302 3.99,0.635 false 3.74,1.51 3.563,1.51 3.563,1.51 3.563,1.177 false 2.719,0.177 3.01,0.177 3.01,0.177 3.01,1.24 true 1.115,1.25 1.573,1.25 true 2.49,2.219 2.49,2.375 2.49,2.375 1.99,2.375 false 1.99,2.375 1.99,2.219 false 1.74,2.656 2.24,2.656 2.24,2.656 2.24,2.375 false 4.813,3.5 6.604,4.24 1.792,0.74 10 Target fluid pressure (original clutch pressure) 2.542,3.49 4.083,4.25 1.542,0.76 10 Centrifugal fluid pressure applied chamber B 5.073,1.74 6.677,2.385 1.604,0.646 10 : Centrifugal fluid pressure applied to chamber B 5.073,1.104 6.688,1.802 1.615,0.698 10 : Centrifugal fluid pressure applied to chamber A 5.073,0.469 6.958,0.865 1.885,0.396 10 : Target fluid pressure 3.385,0.219 4.271,0.625 0.885,0.406 10 Clutch 3.792,1.438 4.677,1.844 0.885,0.406 10 Piston 0.917,0.094 2.708,0.75 1.792,0.656 10 Chamber B (Centrifugal Fluid Pressure Chamber) 0.271,1.177 1.083,2.01 0.813,0.833 10 Chamber A (Piston Fluid Pressure Chamber) 0.302,2.573 1.719,3.156 1.417,0.583 10 Fluid Pressure Applied to Piston 2.844,2.719 3.865,3.125 1.021,0.406 10 Shaft Side 0.604,3.531 2,4.26 1.396,0.729 10 Fluid pressure applied to piston