Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › from 2013.11
NM30B0U _56 Audio / Visual / Telematics _009435 AUDIO / VIDEO _0051113 AUDIO AND VISUAL SYSTEM CO CONTROL F

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  CONTROL  BLUETOOTH HANDS-FREE CONTROL  


FUNCTION


a.

Bluetooth is a short-distance, high-speed wireless data communication standard that uses the 2.4 GHz frequency band prescribed by the Bluetooth Special Interest Group (SIG).


b.

The Bluetooth hands-free system enables drivers to place or receive phone calls without operating a cellular phone.


c.

The Bluetooth hands-free system is included in the audio head unit.


d.

The major hands-free functions are shown in the following table:

Function *1 *2 *3
Calling with a Bluetooth Phone By Dial Pad ○ ○ ○
By Contacts - ○ (2500 Items)*4 ○ (2500 Items)*4
By Phonebook ○ (1000 Items)*5 - -
By Call History*6 - ○ ○
By Call History*6 Dialed Number ○ (10 Items) - -
Received Call ○ (10 Items) - -
Missed Call ○ (10 Items) - -
All Call History ○ - -
By Favorites*6 - ○ ○
By Speed Dial*6 ○ - -
By Voice Recognition*6 Dialing by Name - ○ ○
Dialing by Phone Number - ○ ○
By Point Of Interest (POI) Call - - ○
By Short Message Service (SMS)/Multimedia Messaging Service (MMS)/e-mail Reception Screen*6 - ○ ○
Mail Screen*6 - ○ ○
Text Messages - ○ ○
Receive with Bluetooth Phone/Talk on Bluetooth Phone Receiving Call*6 Received Manually ○ ○ ○
Refused ○ ○ ○
Interrupt Call*6 - ○ ○
Tone Sending By Dial - ○ ○
By Registered Number*6 ○ ○ ○
Receive and Reply Message with Bluetooth Phone Receiving Message*6 - ○ ○
Replying (Quick Reply)*6 - ○ ○
Recognition/Connection Registering Bluetooth Phone ○ (5 Bluetooth Phones) ○ (5 Bluetooth Phones) ○ (5 Bluetooth Phones)
Connecting Bluetooth Phone Connected Automatically*6 ○ ○ ○
Connected Manually*6 ○ ○ ○
Setting Setting Automatic Connection ○ ○ ○

HINT:

○: Equipped

-: Not equipped

*1: Models with base audio system

*2: Models with display audio system

*3: Models with navigation system

*4: It is possible to have up to 2500 items per telephone (Bluetooth phone).

*5: It is possible to have up to 1000 items per telephone (Bluetooth phone).

*6: Can be performed while driving.



e.

The hands-free functions of the base audio system are shown in the following table. However, for safety, some functions may not be selectable when the vehicle is being driven.

Function Outline
Calling with a Bluetooth Phone By Dial Pad The user can call by inputting a telephone number.
By Phonebook The user can call by using the contacts data that has been transferred from the user's cellular phone. The user can register up to 1000 items in the phone book.
By Call History*1 Dialed Number The user can call by selecting a previously dialed number.
Received Call The user can call by selecting the telephone number of a received call.
Missed Call The user can call by selecting the telephone number of a missed call.
All Call History The user can call by selecting the telephone number from all call history. However, the user can use the last 5 numbers while driving.
By Speed Dial*1 The user can call by using registered telephone numbers selected from the phonebook, dialed numbers or received calls.
Receiving a Call Using a Bluetooth Phone*1 When a call is received, the incoming call screen is displayed with a sound.
Talking on a Bluetooth Phone*1 While the user is talking on the phone, the talking screen is displayed.
Changing Bluetooth Phone Settings Speed Dial Registration The user can register a desired telephone number from the contacts, dialed numbers or received calls.
Volume Settings The user can set the volume.
Phonebook Settings Transferring a telephone number: The user can transfer telephone numbers from the Bluetooth phone to the system.
Registering phone numbers: The user can register phone numbers in the phonebook.*2
Adding data to the phonebook: The user can add data to the phonebook.*2
Deleting all the phone data: The user can delete all the phone data.*2
Deleting the call history data: The user can delete the call history data individually or all at once.*2
Registering and Selecting a Bluetooth Phone Bluetooth Phone Registration In order to use the hands-free function of a Bluetooth phone, it is necessary to register it with the radio receiver assembly. Once a phone is registered, the hands-free function connects automatically.
Bluetooth Phone Selection*1 When 2 or more registered Bluetooth phones are in the cabin, it is necessary to select which phone to use with the system to prevent the lines from being crossed. Only the selected phone is available for use as a hands-free phone. The phone registered last is automatically selected.
Bluetooth Information Confirmation and Editing The user can set, change and initialize only the passcode information of the Bluetooth phone displayed on the screen.
Deleting a Bluetooth Phone The user can delete a registered Bluetooth phone from the audio head unit.

HINT:

*1: Can be performed while driving.

*2: PBAP non-compatible, on PBAP-compatible phone with the automatic telephone number transfer function set to off.



f.

The hands-free functions of the display audio system are shown in the following table. However, for safety, some functions may not be selectable when the vehicle is being driven.

Function Outline
Calling with a Bluetooth Phone By Dial Pad The user can call by inputting a telephone number.
By Contacts The user can call by using the contact data that has been transferred from the user's cellular phone. The user can register up to 2500 items in the contact list.
By Call History*1 The user can call by selecting a telephone number from all call history. However, the number of the telephone numbers in the call history that the user can use is limited while driving.
By Favorites*1 The user can call by using a registered telephone number selected from the contact list, dialed numbers or received calls.
By Voice Recognition*1 Dialing by Name The user can call by saying a name registered in the contact list.
Dialing by Phone Number The user can call by saying a desired number.
By Short Message Service (SMS)/Multimedia Messaging Service (MMS)/e-mail Reception Screen*1 The user can call by operating a switch when "Call" is displayed on the incoming message screen.
Mail Screen*1 The user can call by operating a switch when "Call" is displayed on the mail screen.
Text Messages The user can call by operating a switch when telephone numbers are displayed in blue in the text message.
Receiving a Call Using a Bluetooth Phone*1 When a call is received, the incoming call screen is displayed with a sound.
Talking on a Bluetooth Phone*1 While the user is talking on the phone, the talking screen is displayed.
Changing Bluetooth Phone Settings Favorites Registration The user can register a desired telephone number from the contact list, dialed numbers or received calls. Up to 15 favorite contacts can be registered.
Volume Settings The user can set the volume.
Contact Settings Transferring a telephone number: The user can transfer telephone numbers from the Bluetooth phone to the system. Up to 2500 data items (up to 4 numbers and e-mail addresses per entry) can be registered in the contact list.
Automatically transferring a phone number: When a PBAP-compatible phone is connected, the phonebook data of the phone can be automatically transferred.
Registering phone numbers: The user can register phone numbers in the contact list.*2
Adding data to the contact list: The user can add data to the contact list.*2
Editing data: The user can edit the registered data.*2
Deleting data: The user can delete the data.*2
Deleting all the phone data: The user can delete all the phone data.*2
Deleting the call history data: The user can delete the call history data all at once.*2
Screen Settings Receiving call display: The user can select the receiving call display.
Contact data and call history data transfer condition: The user can enable/disable display of a message that indicates whether contact data and call history data transmission has completed or failed.
The Bluetooth connection status at startup: The user can enable/disable display of the connection check which is displayed after the ignition switch is turned to ACC or ON and Bluetooth automatically connects.
Initializing the settings: The user can initialize the settings.
Registering and Selecting a Bluetooth Phone Bluetooth Phone Registration In order to use the hands-free function of a Bluetooth phone, it is necessary to register the phone with the radio receiver assembly. Once a phone is registered, the hands-free function connects automatically.
Bluetooth Phone Selection*1 When 2 or more registered Bluetooth phones are in the cabin, it is necessary to select which phone to use to prevent the lines from being crossed. Only the selected phone is available for use as a hands-free phone. The phone registered last is automatically selected.
Bluetooth Information Confirmation and Editing The user can set, change and initialize the information of the Bluetooth phone displayed on the screen.
Deleting a Bluetooth Phone The user can delete a registered Bluetooth phone from the audio head unit.
Bluetooth Phone Message*3 Checking Message The user can transmit the messages (Short Message Service (SMS)/Multimedia Messaging Service (MMS)/e-mail) received on the Bluetooth phone to the audio head unit.
·

Displaying the message text.

·

Reading out of the message.*1

·

Calling a Short Message Service (SMS)/Multimedia Messaging Service (MMS) message sender's phone number.*1


Reply Message*1 Replies to a message (Short Message Service (SMS)/Multimedia Messaging Service (MMS)/e-mail) received on the Bluetooth phone.
Editing Reply Message The user can edit the reply.
Displaying Mail List*1 Displays the list of received messages (Short Message Service (SMS)/Multimedia Messaging Service (MMS)/e-mail). However, the number of the received messages in the list that the user can view is limited while driving.

HINT:

*1: Can be operated while driving.

*2: PBAP non-compatible phone, or PBAP-compatible phone with the automatic telephone number transfer function set to off

*3: Depending on the phone connected, some message services (checking or replying to messages, or displaying mail list) are not available.



g.

The hands-free functions of the navigation system are shown in the following table. However, for safety, some functions may not be selectable when the vehicle is being driven.

Function Outline
Calling with a Bluetooth Phone By Dial Pad The user can call by inputting a telephone number.
By Contacts The user can call by using the contact data that has been transferred from the user's cellular phone. The user can register up to 2500 items in the contact list.
By Call History*1 The user can call by selecting a telephone number from all call history. However, the number of the telephone numbers in the call history that the user can use is limited while driving.
By Favorites*1 The user can call by using a registered telephone number selected from the contact list, dialed numbers or received calls.
By Voice Recognition*1 Dialing by Name The user can call by saying a name registered in the contact list.
Dialing by Phone Number The user can call by saying a desired number.
By Point Of Interest (POI) The user can call by operating a switch when "Call" is displayed on the navigation screen.
By Short Message Service (SMS)/Multimedia Messaging Service (MMS)/e-mail Reception Screen*1 The user can call by operating a switch when "Call" is displayed on the incoming message screen.
Mail Screen*1 The user can call by operating a switch when "Call" is displayed on the mail screen.
Text Messages The user can call by operating a switch when telephone numbers are displayed in blue in the text message.
Receiving a Call Using a Bluetooth Phone*1 When a call is received, the incoming call screen is displayed with a sound.
Talking on a Bluetooth Phone*1 While the user is talking on the phone, the talking screen is displayed.
Changing Bluetooth Phone Settings Favorites Registration The user can register a desired telephone number from the contact list, dialed numbers or received calls. Up to 15 favorite contacts can be registered.
Volume Settings The user can set the volume.
Contact Settings Transferring a telephone number: The user can transfer telephone numbers from the Bluetooth phone to the system. Up to 2500 data items (up to 4 numbers and e-mail addresses per entry) can be registered in the contact list.
Automatically transferring a phone number: When a PBAP-compatible phone is connected, the phonebook data of the phone can be automatically transferred.
Registering phone numbers: The user can register phone numbers in the contact list.*2
Adding data to the contact list: The user can add data to the contact list.*2
Editing data: The user can edit the registered data.*2
Deleting data: The user can delete the data.*2
Deleting all the phone data: The user can delete all the phone data.*2
Deleting the call history data: The user can delete the call history data all at once.*2
Screen Settings Receiving call display: The user can select the receiving call display.
Contact data and call history data transfer condition: The user can enable/disable display of a message that indicates whether contact data and call history data transmission has completed or failed.
The Bluetooth connection status at startup: The user can enable/disable display of the connection check which is displayed after the ignition switch is turned to ACC or ON and Bluetooth automatically connects.
Initializing the settings: The user can initialize the settings.
Registering and Selecting a Bluetooth Phone Bluetooth Phone Registration In order to use the hands-free function of a Bluetooth phone, it is necessary to register the phone with the radio receiver assembly. Once a phone is registered, the hands-free function connects automatically.
Bluetooth Phone Selection*1 When 2 or more registered Bluetooth phones are in the cabin, it is necessary to select which phone to use with the system to prevent the lines from being crossed. Only the selected phone is available for use as a hands-free phone. The phone registered last is automatically selected.
Bluetooth Information Confirmation and Editing The user can set, change and initialize the information of the Bluetooth phone displayed on the screen.
Deleting a Bluetooth Phone The user can delete a registered Bluetooth phone from the audio head unit.
Bluetooth Phone Message*3 Checking Message The user can transmit the messages (Short Message Service (SMS)/Multimedia Messaging Service (MMS)/e-mail) received on the Bluetooth phone to the audio head unit.
·

Displaying the message text.

·

Reading out of the message.*1

·

Calling the Short Message Service (SMS)/Multimedia Messaging Service (MMS) message sender's phone number.*1


Reply Message*1 Replies to a message (Short Message Service (SMS)/Multimedia Messaging Service (MMS)/e-mail) received on the Bluetooth phone.
Editing Reply Message The user can edit the reply.
Displaying Mail List*1 Displays the list of received messages (Short Message Service (SMS)/Multimedia Messaging Service (MMS)/e-mail). However, the number of the received messages in the list that the user can view is limited while driving.

HINT:

*1: Can be operated while driving.

*2: PBAP non-compatible phone, or PBAP-compatible phone with the automatic telephone number transfer function set to off

*3: Depending on the phone connected, some message services (checking or replying to messages, or displaying mail list) are not available.