FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Rear Television Camera Assembly | Transmits a video signal representing the area behind the vehicle to the radio and display receiver assembly*1 or navigation receiver assembly*2. |
| Radio and Display Receiver Assembly*1 | ·
Receives signals from the park/neutral position switch assembly and turns the rear television camera assembly on and off. ·
Displays the image transmitted by the rear television camera assembly on the screen. |
| Navigation Receiver Assembly*2 | |
| Park/Neutral Position Switch Assembly | Sends a shift R position signal to the radio and display receiver assembly*1 or navigation receiver assembly*2. |
*1: Models with display audio system
*2: Models with navigation system
OPERATING CONDITION
This system operates when both the following conditions have been met:
The ignition switch is ON.
The shift lever is moved to R.
FUNCTION
Area Displayed on Screen
Objects on the right of the vehicle appear on the right side of the display panel, and objects on the left of the vehicle appear on the left side of the display panel.
The rear television camera assembly uses a wide-angle lens. The perceived distance from images that appear on the screen differs from the actual distance.
| *a | The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens. | - | - |
The area displayed on the screen may vary in accordance with vehicle status or road conditions.
The area covered by the rear television camera assembly is limited. The rear television camera assembly does not show objects close to either corner of the bumper or show the area under the bumper.
DIAGNOSIS
The rear view monitor system is equipped with a diagnosis function which can display the diagnosis menus. For details, refer to the Repair Manual.