Home › Engine / Hybrid System › 2AR-FE ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE
RM30B0U _51 Engine / Hybrid System _008971 2AR-FE ENGINE CONTROL _0049656 CAMSHAFT OIL CONTROL VALVE A

2AR-FE ENGINE CONTROL  CAMSHAFT OIL CONTROL VALVE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)

a.
A195062
1.583,0.865 1.406,0.49 1.406,0.49 1.25,0.49 false 1.073,0.406 1.229,0.563 0.156,0.156 10 *1
*1 New O-Ring


Apply a light coat of engine oil to a new O-ring and install the O-ring to the camshaft timing oil control valve assembly.


b.

Install the camshaft timing oil control valve assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (the surface that contacts the cylinder head cover).

·

Be careful that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.




c.

Connect the camshaft timing oil control valve assembly connector.


Hide 2.INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)

a.
A195062
1.583,0.865 1.406,0.49 1.406,0.49 1.25,0.49 false 1.073,0.406 1.229,0.563 0.156,0.156 10 *1
*1 New O-Ring


Apply a light coat of engine oil to a new O-ring and install the O-ring to the camshaft timing oil control valve assembly.


b.

Install the camshaft timing oil control valve assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (the surface that contacts the cylinder head cover).

·

Be careful that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.




c.

Connect the camshaft timing oil control valve assembly connector.


Hide 4.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY