Home › Engine / Hybrid System › 2AR-FE ENGINE CONTROL › AIR FUEL RATIO SENSOR
RM30B0U _51 Engine / Hybrid System _008971 2AR-FE ENGINE CONTROL _0049666 AIR FUEL RATIO SENSOR G

2AR-FE ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 1.INSPECT AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

a.
A196091
0.917,1.063 1.073,1.063 1.073,1.063 1.417,1.271 false 2.49,1.063 2.333,1.063 2.333,1.063 1.99,1.271 false 2.531,0.99 2.927,1.146 0.396,0.156 10 HA1A 0.646,0.99 0.854,1.146 0.208,0.156 10 +B 0.042,0.063 0.188,0.25 0.146,0.188 10 *a
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω


If the result is not as specified, replace the air fuel ratio sensor.